Build Your Own Clone Message Board

Hey all! Long time fan, first time caller

As stated: Is there perhaps a quick reference to switch the function of the secondary footswitch in the Divided Octave?

Primarily a bassist: I have little to no use for a "Bass Only" switch. Would it be possible to change the second footswitch to something like a toggle for the ringer? Or preferable an A/B for clean/octave and clean/ringer?

Thanks for any help!

Yes, you could make it so that FS2 turns the ringer on and off. You'd need to jumper eyelet 7b to 8b to hardwire octave/dry mixed. Don't connect anything to eyelet 9b. Connect 4,5,and 6b as per the instructions to turn the LED on and off. Omit the SW3 ringer toggle switch. Use the first 3rd of FS2 in place of SW3. Keep in mind that you're going to have an empty hole in your enclosure now.

_________________
*patience is a virtue*

Please do not PM me. email is prefered. keith@buildyourownclone.com