Hi all. I recently got the Mimosa and when I first built it I got it dialed in but was having the issue others have posted about where if the blend is cranked no signal passes. I was able to get some replacement transistors. I checked the new ones and they seem good so I swapped both. But now when measuring the bias it reads 0.2 if anything no matter where its turned to. It turns on, passes dry and wet signal, although they have a hum to them. Not sure if this matters but my multimeter has a 40v setting instead of a 20v.
https://imgur.com/a/r61CGbthttps://imgur.com/a/1x0g7NMhttps://imgur.com/a/IWSH2Z5