Build Your Own Clone Message Board

It is currently Fri Mar 29, 2024 12:21 am

All times are UTC - 6 hours




Post new topic Reply to topic  [ 1 post ] 
Author Message
PostPosted: Wed Oct 07, 2009 4:16 pm 
Offline
Moderator
User avatar

Joined: Wed Apr 26, 2006 5:14 pm
Posts: 8659
Location: Truckee, CA
If you are experiencing a problem with your BYOC build, you've come to the right place. In order for us to help you, please read the rest of this post. Between all of us here, we will come up with a solution.

Your problem is probably not unique. Search this lounge and the other lounges on the forum to see if someone has had the same or a similar problem. A solution may have already been found.

If you can’t find a solution already in the posted somewhere on the forum, then feel free to post your issue here. We’ll be happy to help. Please don’t email or send a private message with your problem. Its better to post it in the forum where everyone can chime in on what the problem may be and what the solution is.


Please note that while bad components do surface occasionally, the most frequent cause, by far, of a non-functioning pedal is a mistake during the build process.


STEPS IN POSTING:

Please follow this format. By doing so, you will get the help you need faster:

First off, you should title your thread accordingly. The reason for this is so that if someone else is having the exact same problem, they may benefit from your experience. If everyone titles their thread "HELP!!!!!!!!" then that makes the search engine less effective.

Second, when posting pictures, please make them big enough to see, but not so big we need to scroll off the screen to see the whole thing. Sometimes it's very helpful to take in the "big picture" all at once.

Also, please post pictures that are in focus. There's no point in posting a picture that is so out of focus that we can't even make out the color codes on the resistors. If the only camera you have is the one on your cell phone, and you cannot get a good close up shot, then don't bother. We'll just have to work with a written description.

This is what your initial post should include:

1. Picture of the top side of your PCB.

2. Picture of the underside of your PCB.

3. Picture that clearly shows your footswitch/jack wiring and the wires going to the PCB

4. Picture that clearly shows your wiring going from the PCB to the off board components

5. Is bypass working?

6. Does the LED come on?

7. If you answer yes to 5 and 6, what does the pedal do when it is "on"? Please be as specific as possible.

8. Do all of the controls work properly? Just 1 or 2 not working?

9. Does the problem change if you switch from battery to a power supply or visa versa.

Submit your tech support thread in this manner and we'll get you going as soon as we can.

Thanks!

_________________
MasterDelayer/Reverbrador/Ampaholic/TopJacker


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group