Build Your Own Clone Message Board

Hi y’all, hope you can help me out. Short version is that i picked up a couple of completed PCBs for two Blackheart amps, one Killer Ant (1/4 watt) and one Handsome Devil (switchable between 7 and 15 watts). I figured it might be an easy way to make a couple of amps to experiment with, but what i didnt anticipate is the difficulty finding any parts lists online that specs out what I would need to complete the builds.

Here is a pic of the Killer Ant PCB I bought, and some close up pics of the transformers I copied from the web:

Front:

Back:

Top:

Closeups:


This is the Handsome Devil PCB (I couldn't find any good pics of its transformers on the web, and I’m looking for inexpensive alternatives to Mercury, etc.):
Front:

Back:


I made a rough list of the basics of what i think i’ll need, but if you can point me in the right direction for transformers or any thing else i might need, I’d be grateful!

Here is my list:
Output transformers
Power transformers
On Off Toggle Switch x2
Power light indicator x2
Power light bulb x2
Knobs
Power cord insert and cords x2
Head cabinet x2
Chassis x2
Screws for chassis’
Preamp and Power tubes
Tube shield x2
Tube socket mounts
Grommets for chassis’
Wire (blue, red, yellow, white, green, brown, striped yellow green, gauge?)

For transformers, I'd start with Hammond, Edcor or Classic Tone.

_________________
“My favorite programming language is SOLDER” - Bob Pease (RIP)

My Website * My Musical Gear * My DIY Pedals: Pg.1 - Pg.2