Build Your Own Clone Message Board

Hey all!

First time poster here.

The title says it all. I have true bypass working, the LED comes on, but there is no sound when the pedal is engaged.

I uploaded some images for inspection.

I'm not very good at using a multimeter, so any instruction would be very helpful. Or any place to find a solid tutorial on it would be good too.

Thank you all so much for any future help.

Lug 5 of your footswitch isn't connected. That's the 'effect in' lug. Put that on, and see where you are. It might be a good idea to go through and clean up your wiring in general, but for now, connect that and see if it works.

_________________
The tone is in my hands?!
Email: nick@buildyourownclone.com

_________________
“My favorite programming language is SOLDER” - Bob Pease (RIP)

My Website * My Musical Gear * My DIY Pedals: Pg.1 - Pg.2

Good eye.

That fixed the issue! THANK YOU!

Sounds great!. Here is what the outside looks like. It has a Yellow LED

Also thanks for the multimeter link.

You guys rock!

Well done, congrats, enjoy the pedal! Great circuit.

_________________
Scott

My band, Austin Hollow