Build Your Own Clone Message Board

Using a 2n7000 as a "clipping diode" is it correct to tie the gate and source together and the drain to ground? And if so, is the way that I am attempting to do it correct? (see photo)

As always... Thanks, in advance.

-=SteveO

_________________
“To know, and not to do, is not to know”

My understanding that you can tie the gate to either the source or the drain, but the two give different FV's and different turn-on behavior. Check out the explanations in this post at the DIYstompboxes forum: https://www.diystompboxes.com/smfforum/ ... #msg769017

_________________
“My favorite programming language is SOLDER” - Bob Pease (RIP)

My Website * My Musical Gear * My DIY Pedals: Pg.1 - Pg.2

Thank you! I'll have a look see!

_________________
“To know, and not to do, is not to know”

Here is a great example in a rat circuit.

http://beavisaudio.com/projects/fkr/ima ... rMouse.gif


Sent from my iPhone using Tapatalk

_________________
Pedal building is like the opposite of sex. All the fun stuff happens before you get in the box.

Thanks jimilee! Looks interesting! I've got a couple of these GGG boards. Definitely going to try that.

_________________
“To know, and not to do, is not to know”